PCIe-101 : PCIe / PCI Express to Expresscard adapter The Latest PCI Express supports 2.5Gb/s data rate for a fastest data transfer. This PCIe-101 accepts both 34mm and 54 mm express card and allows express card’s Hot- Plug and hot swap without power off the system. The PCIe-101 is an easy and quick installing to extend more applications for personal desktop PC using. Features: Supports 34mm & 54mm Express Card Push- Push mechanism for easy insertion of Express Card Install in PCI Express Bus Supports 2.5Gb/s fast data rate Enable Hop- Plug and hot swap Maximize card interoperability for user flexibility Better Mini USB 2.0 connector to USB Host connection Input: 34mm Express Cards  54mm Express Cards Output: PCI Express USB 2.0 PCI Express Transfer rate: 2.5Gbit/sec (5Gbit/sec) USB Transfer rate: 480Mbit/sec Supporting OS: 98/98SE/2000/ME/XP/Vista MAC10.1.3 above Safety approval: CE/FCC/VCCI/BSMI Dimension: 90mm *69mm * 12mm
Internal/External Card Reader/Writer Series: IDE interface card reader: IIA: IDE / ATA Interface Flash Card Reader/Writer 3.5" Drive Bay Design Compatible with ATAPI and PIO Mode 4 Generic Drivers Supported by Windows OS (98 and above) 1.Perfect solution for accessing various flash cards on desktop or other devices with IDE/ATAPI interface. 2.Support ATA Flash Card,or any other card adapters. 3.Fully compatible with ATAPI removable/rewritable media interface and PIO mode 4. 4.Dynamic hot-swappable design 5.Provides front panel fits both 3.5" and 5.25" (mounting bracket required) desktop drive bay. IISDMC: Multi-in-one Internal Card Reader/Writer 3.5" Drive Bay ATAPI & PIO mode 4 Compatible Suuports: SD / MMC / MS / MS Pro / SM / CF Type I / CF Type II and Microdrive 1.Perfect solution for accessing various flash cards on desktop or book-size PC via IDE/ATAPI interface. 2. Support SM/SD/MMC/Memory Stick/Memory Stick Pro/CF Type I/II/IBM Microdrive. 3.Fully compatible with ATAPI removable/rewritable media interface and PIO mode 4. 4.Provides front panel fits both 3.5" and 5.25" (mounting bracket required) desktop drive bay.
PCI Interface card reader/adapter: PCD-TP110CS (Low Profile PCI Bus to Front-Load PC CardBus Read-Writer)                                          PCD-TP110CS is a high-performance PCI-to-PC Card Drive Unit that supports one independent card socket compliant with the 16/32-bit PC Card standard defined in 1997 PC Card Standard. Provides a rich feature set that makes it the best choice for bridging between PCI and PC Card in desktop computers. Compliant with the 16-bit PC Card specification defines in PCMCIA Release 2.1 and JEIDA 4.2 and can support any combination of 16-bit or 32-bit PC Card in the one socket, powered at 5V or 3.3V as required. The host system interface of PCD-TP110CS is compliant with the PCI Local Bus specification 2.2. PCD-TP110CS is register set compatible with Intel 82365SL controller and compatible with ExCA, it enables the PCD-TP110CS to support almost all of the PC Card applications including: SRAM card, Linear Flash card, ATA Flash card, Modem card and Wireless LAN card. * PCD-TP110CS provides one front-access PCMCIA / CardBus socket solution for PC. * PCI Local Bus Specification Revision 2.2 compliant. * PCMCIA 2.1, JEIDA 4.2 compliant. 3.3V, 5.0V, or mixed 3.3V/5.0V operation. * Intel 82365SL register compatible, ExCA compatible. * The 3.5" front Drive Unit with built-in one socket is connected to the PCI Interface Board by using the flat ribbon cable. * There are one PC card socket that can be used for Type I / Type II / Type III PC Card in this unit. * Support IRQ steering (PCMCIA -16Bit), native driver built in Windows XP. * Support IRQ steering (PCMCIA -16Bit), optional driver provided in Windows Me or Windows 2000 Socket: Supports PC Cards (Type I/II/II) PCMCIA: 8/16 Bit, 8 MHz, 3.3/5V. CardBus: 32 Bit, 33 MHz, 3.3 V. Power Information: Power Voltage @ PCI DC 3.3V/5V/12V PC Card Socket DC 3.3 V/5V @1A Physical Character @ PC Card Drive Length: 147.7+/-0.5mm Width: 101.6+/-0.5mm Height: 26.2+/-0.5mm Weight (w/o cable)360g Data Transfer Rate (Max) CardBus Mode: 132 Mbytes/sec Environment Temperature Operating: 0ºC to 70ºC Storage: -55ºC to 125ºC Relative Humidity Operating R.H.% 0-70% Storage R.H. % 0-95% Interface: PCI to PCMCIA/CardBus Interface *cable included, black panel front available PCD-RP-220S(PCI Bus to Front-Load PC Card Read-Writer) PCD-TP-220S(PCI Bus to Front-Load PC Card Read-Writer) PCI-to-PC 3.5" Floppy Drive Bay Unit Two independent card sockets 16-bit PC Card compliant Unique driver and software provided to service IO cards requiring IRQ functionality from the socket Supports major 16-bit PC Card applications including: SRAM card, Linear Flash card, ATA card, Modem card and LAN card 1.PCI-PCMCIA Bridge adapter board and slot device box. 2.Allows PCMCIA PC Cards for desktop PC. 3.Supplied sharing ISA-IRQ (Not use ISA-IRQ routing board) allows you to use 16-bit PC Card. 4.Automatic detection 16-bit PC Card. 5. 3.3V,5.5V, or mixed 3.3/5V operations. 6.Intel 82365SL register compatible,ExCA compatible. PCD-RP-101CS; PCD-TP-101CS PCD-RP-202CS; PCD-TP-202CS (PCI Bus to Rear-Load PC CardBus Read-Writer) Notebook PCI to desktop PC Card Bridge Compliant with PCMCIA specifications Release 2.1 and JEIDA 4.1 Supports 8-bit or 16-bit PC Card on one(two) sockets Supports major 16-bit PC Card applications including: SRAM card, Linear Flash card, ATA card, Modem card and LAN card. 1.Ideal for data transfer or backup between desktop PC and mobile computer. 2.Supports all kinds of 16-bit(PCMCIA 2.1/JEIDA 4.1) and 32-bit (CardBus) PC Card. 3.One(two) rear access PC Card Slot. 4.Supports Hot Swapping. Insert and remove PC Card without shutting down your system.
External Card Reader/Writer Series: USB ATA Flash PC Card and Multi in One Card Reader (Item # : CACF-UISDMCX51W, CACF-UISDMCX70W)   USB2.0 USB ATA Flash PC Card and Multi in One Card Reader [Note]: Please note that this model will only support memory cards. Neither will it not support non-storage cards nor will it support SRAM and linear flash memory cards. CACF: ***Supports Flash ATA PC/PCMCIA card only when work with UISDMCX51W Product Description: 1. Converts any CF Type I / Type II slot into a PC Card slot 2. Flexible, durable, soft circuit board with rubber protection 3. Small, portable, and light weight 4. No driver necessary 5. No power necessary Note: Only support 16-bit PC card devices. 32-bit CardBus devices are not supported. UISDMCX51W: ***Supports ATA flash PC card(CACF required) USB bus powered, no power adapter required Supports media hot swapping and USB plug and play Compact and portable design with low power consumption Simultaneous slot access allows data exchange between supported media cards Up to USB High Speed 480Mbps (Megabits) interface access to host systems with USB 2.0 Operating system support includes Windows 98/98SE/ME/2000/XP, Mac OS 8.6 or later, and Mac OS X LED indicators for Power and Access Easy Installation CE Approved Media Support : Slot 1 for Memory Stick and Memory Stick Pro (Duo and Duo Pro when used in adaptors) Slot 2 for Type I or II CompactFlash ATA storage cards including Hitachi Microdrives Slot 3 for MultiMediaCard and SD Card (Secure Digital) Slot 4 for xD-Picture Card and 3.3V SmartMedia Standards PC Card Version 2.1/JEIDA 4.1 Universal Serial Bus 2.0/1.1
Memory/PC Card Adapter Seriers: PCIe Interface ExpressCard Adapter for UDMA Mode CF Cards Model no: CFEXP/DR25 1-slot Plus PCIe ExpressCard Interface Media Accepted: CompactFlash Type I and II (CFA Specification Revision 4.1) CompactFlash II+ Hard Drives, including Microdrives Does NOT work with CF+ I/O Devices Multi-in-one PC card adapter: (All in One PC Card Adapter) Model no: SDMXCA 1-slot plus PCMCIA Interface Supports SM/SD/MMC/MS/MS Pro/(XD) memory cards Two-in-One Mini SD & MS Duo to PC card adapter: Model no: MSMDCA 1-slot plus PCMCIA Interface Supports Mini SD & MS Duo memory cards CF to PC card adapter: Model no.: CFCA/CF01 1-slot plus PCMCIA Interface Supports CF type I CF Type Two to PC card adapter: Model no: CFCA2 1-slot plus PCMCIA Interface Supports CF type I/II and Micro Drive cards CardBus adapter(CF/Micro Drive): Model no.: CFCA32 1-slot plus cardbus PCMCIA Interface(32bit) Supports CF type I/II and Micro Drive cards CardBus adapter(Multi-in-one): Model no.: DMXCA32 1-slot plus cardbus PCMCIA Interface(32 bit) Supports SD/MMC/MS/MS Pro/(XD)/(Mini SD)/(MS Duo) memory cards Mini SD to SD adapter: 1-slot plus SD interface Supports Mini SD memory card MS Duo to MS adapter: 1-slot plus MS interface Supports MS Duo memory card SD/SDHC/SDXC to High Speed Extreme CF tpe II adapter: SDXCF Compatible with SD system Spec 2.0. Supports SD cards with various kinds of form factor, including SDHC / SD / miniSDHC (with adapter) / miniSD (with adapter) / microSDHC (with adapter) / microSD (with adapter) / TransFlash (with adapter). Compatible with MMC system Spec 4.0. Supports MMC cards with various kinds of form factor. SD 3.0 ready; accept SD 3.0 card with exFAT file system on Windows OS. Supports CF true IDE mode, memory mode, and I/O mode. High-speed CF interface with extreme performance. IDE interface supports DMA mode and PIO mode. Equipped with push-push SD socket for easy card insertion and extraction. Type II CF design. Supports Windows / Mac OS / Linux. SD/SDHC to CF type II adapter: SDHCF Supports Secure Digital / MultiMediaCard. Supports SD and MMC flash cards all capacities: Converts storage card to standard compact flash card. Supports Windows 98/98 SE/2000/ME/XP/VISTA/7 and Mac OS 8.6 or above. Supports Hot-Swapping. Dynamic plug-in/remove from Compact Flash card slot without turning off the system SD/SDHC/SDIO/MMC to 32bit high speed PCMCIA PC Card adapter/reader: SDCBA NOTE: For WIN XP SP3 or VISTA, not for Mac or Win 98/ME/2000. Can not work with any deivce without WIN XP SP3 or VISTA. Can not work with GPS/Navigation/Music equipment. Features: Compliant with 32-bit CardBus Type II PC Card interface (JEIDA 4.2). Maximum frequency reaches 33MHz. Compliant with SD Memory Card Specification 2.0. Supports SDHC / High Speed SD Clock (50MHz) Compliant with SDIO Specification 1.1. Supports all kinds of SDIO Card Applications. Compliant with SD Host Controller Standard Specification 1.0. Compliant with MultiMediaCard Specification 4.1. Supports MMC Plus and MMC Mobile (with adapter.). Push-Push card slot for easy insertion/extraction of card. Low power consumption, 3.3V single power operation. Software Suspend mode compliant with ACPI. Supports Hardware Suspend. Specifications: Input Socket SDHC / SD (SD Specification 2.0) SDIO (SDIO Specification 1.1) MMC (MMC Specification 4.1) Output Interface 32-bit CardBus Type II PC Card Supporting Card SDHC 4GB~ SD 8MB~2GB miniSD 8MB~2GB (Adapter Required) microSDHC 4GB~ (Adapter Required) microSD 8MB~2GB (Adapter Required) MMC / MMC Plus All Capacities RS-MMC / MMC Mobile All Capacities Supporting OS Windows XP / VISTA Safety Approval CE / FCC Dimensions 85.0 mm(L)* 54.0 mm(W)* 5.0 mm(H)