DigiGear, Inc.

 

The single source for digital accessories!

 
UATASD SDXCPA SDXCF SDXCF1PCD-TP202CS/PCD-TP220SCPCEXPPCE10EZ3D Photo PrintAdapter/ReaderContact & Shop

 

PCU10:

 External USB to 34/54mm ExpressCard Adapter/Reader/Writer(Basic Type)

External USB to 34/54mm ExpressCard Adapter/Reader/Writer(Basic Type)

1 socket for USB 2.0 ExpressCard.

Adds support for USB-based ExpressCard/54 /34 adapters to any USB equipped computer

Quickly and easily adds one ExpressCard/54 slot (USB-based) to USB equipped desktop or notebook computers; allowing older systems to use the latest ExpressCard adapter cards

Works with USB-based ExpressCard devices including Wireless Wide Area Network modems (such as CDMA, EV-DO, GPRS, etc.), flash memory, flash card adapters, security, legacy I/O (PS2, serial, parallel), optical disk drives, GPS receivers, and more…

Important: This adapter only works with USB-based ExpressCard devices. PCI-Express based ExpressCard devices will not be detected. Please check with your device’s manufacturer if you are not certain


Package Contents:
3.5” ExpressCard Bay x1
External USB Cable x1
Manual x1

Compliant with USB specification, revision 2.0
RoHS-compliant
Allows USB-based ExpressCard/54 /34 adapters to work through your system USB 2.0 port
Supports data transfer rate up to 480Mb/s
Share your USB-based ExpressCard devices between your laptop and desktop (with this adapter)
Transparent installation with no added driver
Hot-plug and hot-swap support allow you to connect/detach devices without turning off your system

Things to Know when Using the Reader
�� There are two interfaces of ExpressCard: PCI-E ExpressCard and USB 2.0 ExpressCard. PCE10 and Advanced Type card reader accept both PCI-E and USB 2.0 ExpressCard, but the Basic Type(PCU10) card reader only accepts USB 2.0 ExpressCard.
�� When using the USB 2.0 ExpressCard, the system will automatically identify the ExpressCard and add new device at the insertion of the card.
�� When using the PCI-E ExpressCard, the system cannot automatically identify new device, so the user need to add new device manually.
After inserting the PCI-E ExpressCard, please do following procedure and enter:
Control Panel �� System �� Hardware �� Device Manager ��
Scan for Hardware Changes.
After the scan, the system will identify the ExpressCard and add new device.
�� The card reader does not require any driver to be installed. It is when a device is plug into the reader that the system would detect that device and ask for a driver for the ExpressCard.
�� Although the reader supports Hot-Swap function, we still suggest the
ExpressCard should be inserted before power on the system.